• ATP050 probe

  Only the supplied ATP050 probe must be used with the Autotuner tool. This is connected to the tool via the ATC050 cable. The cable must be connected on one side to the top of the probe and on the other side to the "BOOT" connector of the Autotuner tool. The ATP050 probe is exclusively used for Bosch EDC17 ECUs. The pins of the ATP050 probe have springs. Make surSome readers

• ATUC050 universal cable + universal box

  Bench Bench method allows you to connect the ECU using the universal cable. You don't have to open the ECU. Boot Some ECUs do not have a BOSCH port. They can not be read using the ATP050 probe. Therefore, it is necessSome readers

• ATPS01 power adapter

  Please only use the power supply provided with the Autotuner tool : ATPS01. Autotuner never requires external power unless it is explicitly stipulated in the help interface. The ATPS01 power supply is plugged into the "Power" connector of the Autotuner tool. It is 100-240V compatible. Power supplies for Australia, USA and UK are available as an option. Be sure tFew readers

• ATPOBD cable

  Some ECUs can be read and written directly via the OBD diagnostic socket. In this case, it is therefore not necessary to remove the computer from the vehicle. The OBD cable must be connected on one side to the vehicle's diagnostic socket and on the other side to the "OBD" connector of the Autotuner tool. The help interface is used to locate the diagnostic sockeFew readers